Rosette Stencil for creating patterns with Stencil coatings

Rosette Stencil is a wax coated cardboard stencil that comes three different styles: Brick, Star and Cobble Rosette. It is designed to be held down with Blutac and discarded once used.

Were would I use a Rosette Stencil?

If you don’t want to stencil your whole area but still want to add a striking feature that will be the focal point of your driveway or concrete area, then using a Rosestte Stencil is an easy way to do just that. You lay the Rosette Stencil onto the driveway or concrete area, holding it down where needed by Blutac. Once you are satisfied with the stencil then you continue with the Stencilshield process. Once you have finished applying STENCILSHIELD Top & Base Coat you can remove the stencil leaving the desired pattern behind.

How good is the Rosette Stencil to use?

The Rosette Stencil is easy to apply and remove for the DIY person, making it the perfect product to add a feature to your concrete areas or driveways.

Do you have these products for your project?

• Concrete stenciling

You need these for your Concrete stenciling project:

(Learn more about Concrete stenciling projects)

FLOORSHIELD- Protective coating for concrete or timber floor

'MOULDSHIELD C' Mould and Grease Cleaner

'SHIELDSEAL X' Solvent based clear concrete sealer and primer

'CONCRESHIELD X' (Clear Glaze) hard wearing solvent paint

Stencil Tape- 12mm Fibreglass reinforced tape

'CONCRESHIELD 2 PAC' (Clear Glaze) Hard wearing 2Pac clear

STENCILSHIELD 'Primer Plus' for concrete driveways and paths

STENCILSHIELD 'Top & Base Coat' (All Colours) for driveways

STENCILSHIELD 'Slab Repair' fills cracks in concrete

'STENCILSHIELD Covercoat W' protects your stencil coating

Border Stencil for creating patterns with Stencil coatings

Hopper Spray Gun to Apply Stencil Coatings and Texture Coats

Main Stencil for creating patterns with Stencil coatings

Diamond Stencil for creating patterns with Stencil coatings